dji phantom 3 standard

Do you know how to update the DJI phantom 3 standard (Updating Firmware)?

The Phantom 3 Standard is one of the drones created by DJI, one of the most well-known drone manufacturers. as a result, we’ve chosen to include upgrading procedures for the DJI Phantom 3 Standard in this article. It’s good to know that the quadcopter’s operating system improves. Join us as we look into this matter.

How to update the DJI Phantom 3 Standard?

All you have to do now is keep it updated so that you can make use of all of its features and functionality.

There are various stages to upgrading the DJI Phantom 3 standard, which we will walk you through step by step:

  1. Turn on the option (Aircraft) and the radio controller in the first stage.
  2. Then, connect your device to the internet using a Wi-Fi connection.
  3. On your tablet or smartphone, open the DJI Go drone app.
  4. When the message “New firmware update is available” appears at the top of the program screen, click on it.
  5. Connect your smartphone to the internet via Wi-Fi.
  6. Return to the DJI drone software at this point and press the download button at the bottom of the display. as you can see, there is a status bar on the screen.
  7. This indication shows where the operating system download and update are in the process and how much time is left before it is finished. additional steps of updating the Phantom 3 Standard base operating system

Read more: phantom 3 standard review

So far, we have taught you the first seven stages, and we will continue to teach you the other phases as the Updating Firmware process progresses:

  • Once the update file has been downloaded, restart your mobile phone or tablet’s internet access and switch it from Wi-Fi to Wi-Fi AirCraft, then join your bird and its controller.
  • Log in to the standard Phantom 3 app once more. Wait until you choose the ‘Start Upgrade’ item.
  • When you return to the Progress Bar page, it will demonstrate how far the DJI phantom 3 standard has been updated. The most critical point to remember at this point is that you should never, ever turn off AirCraft on your smartphone or tablet. This may cause issues for your bird.
  • After you’ve done this step entirely and correctly, select the choice that shows on the Phantom 3 Standard application’s main screen. The device should then be restarted. The factor you see is your bird, or rather your bird’s operating system, has been appropriately updated, and a new operating system has been installed for it.


Every DJI drone must be Updating Firmware regularly. In this post, we went over the fundamental mechanisms and first steps for updating Firmware the operating system.

We hope you found this post to be helpful. If you have any issues or queries about this, please leave them in the comments section.


Hi, I'm Oliver, the content writer and translator. Growing up with a fascination for all things aviation-related, I was naturally fascinated by the concept of drones. I spent many hours each day learning everything I could about them. After some time, I decided to build my website about drones and answer all the questions and worries about drones and also evaluate new drones. I welcome your feedback and consideration. Message me using the form on the contact page

Related Articles

One Comment

  1. Attractive section of content. I just stumbled upon your weblog and
    in accession capital to assert that I acquire in fact enjoyed account your blog posts.
    Anyway I’ll be subscribing to your augment and even I achievement you access consistently fast.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button