Phantom 3 standard parts list

With the progress of technology and the growth of electronic devices, we are now witnessing the emergence of devices that make human life easier daily.

Drones or unmanned aerial vehicles (UAVs), for example, have provided a foundation for videoing and aerial photography.

This digitization is available in various styles and categories, with the most well-known being DJI Phantom drones.

The Phantom 3 Standard is one of the most extensively used and cost-effective Drones. Analyzing this device’s parts reveals that all parts utilized are of very excellent quality in addition to its low cost.

Drones, in general, are made up of several parts and pieces. We chose to deal with these difficulties concerning the drone in the continuation of this post and interact with you in this sector to become familiar with the parts and pricing in its implementation.

As a result, we encourage you to accompany us on this journey throughout the essay.

Introducing DJI phantom 3 standard parts list

To begin, to better comprehend the Phantom 3 standard drone created by DJI, it is essential to be acquainted enough with its components and be entirely conversant with the numerous sections of this gadget.

In the table below, we have summarized some of this tech’s most valuable and critical elements to offer you a basic understanding.

The following are the Phantom 3 standard list:

1. Phantom 3 Standard Charger
2. Phantom 3 Standard Battery
3.  Gimbal
4.  radio Controller
5.  Locusts
6. Shell
7.  Aircraft
8. Gimbal Camera
9.  Engine
10.  Connection Cables
11. Central Board
12. Gimbal GPS
13. Phantom 3 Standard Sensors
14. Mobile Holder
15. Gimbal Arm With Motor
16. Gimbal Holders or Gimbal Locks
17. Vibrators

Aside from the elements indicated in the table above, other accessories such as the camera or gimbal locks, landing pads, controller coverings, the bird itself, range-enhancing antennas, extra batteries, and camera lenses, compass, landing base, handle for manual video recording, neck strap for radio control, several types of awnings for camera and lens, locust protector, hard case, and so on, are accessible to provide.

Read more: Full introduction of Phantom 3 standard accessories

The Phantom 3 standard body design and its characteristics

The body is the most significant component of the phantom three standard parts we want to look at.

• This device’s measurements are 50 * 50 * 25 cm, and its height can be raised to 25 cm with the aid of unique bases.
• This gadget is constructed of compressed plastic and is entirely impervious to shocks, obstructions, and environmental variables.

The accessibility of all parts of this gadget is one of the aspects that have made this device so famous and extensively utilized, in addition to the low price and excellent quality of parts.

The Phantom 3 standard battery

The battery of this drone is another crucial factor to examine from the DJI Phantom 3 standard parts list. This drone’s battery is a 4-cell battery with a capacity of 15.2 volts.

This drone features a battery capacity of 4480 mAh and a more straightforward performance than prior iterations.

In reality, the density and power of this battery have been much enhanced, to the point that this device may easily continue in flight mode for 25 minutes after fully charging the Phantom 3 standard battery.

This device’s advantage is that it announces the battery capacity while in flight. LEDs that display the charge level have been created to charge the Phantom 3 standard battery.

Furthermore, the battery of this drone features a plastic shock absorber, which serves as an excellent defender.

The Phantom 3 standard camera

Following the release of the device components, it is now time to present another critical part, the Phantom 3 standard camera. Because this device has a robust camera and is fitted for this technology, it can deliver a fantastic experience in the field of video and photography with a resolution of 12 megapixels for the user, and bear in mind that the movies that the cameras of this drone are shot in 1080 FHD quality.

The Phantom 3 standard gimbal

Gimbal is another piece on the Phantom 3 standard parts list. A gimbal is a vibrating mechanism that allows the device to produce continuous, one-handed photos and movies while minimizing vibration. This bird’s gimbal is a 3-axis kind with an exclusive layout that DJI explored for this series of Drones.

Read more: Phantom 3 standard gimbal

The Phantom 3 standard radio control

Another aspect of the phantom 3 standard lists that we will go over is the radio control of this aircraft. This controller includes 6 channels, a 2.4 GHz capacity, and a Wi-Fi system.

This so-called controller is quite helpful and delivers an excellent experience in terms of hand positioning and ergonomics. Hooks developed for this controller are set to Mode 2 by default.

However, it is susceptible to change depending on the circumstances. The left stick can monitor and manage the flying engine and its deviation from the course.

The right stick also changes the flying height and rotation of the bird. A link at the top and right side of this radio control, on the other hand, has the potential to modify the drone’s flying mode.

The left connector can likewise be used to switch between IOC modes. Furthermore, the LEDs on this radio control may be used to obtain information about the device’s battery and status.

This radio control has a range of 500 meters and may be used to control the device from that distance.

Read more: Phantom 3 Standard controller

Finally,

This article discussed the DJI Phantom 3 standard parts list and tried to understand the situation and use this new tech easily.

So as we explained above, this drone has lots of central parts and the other accessories necessary for using this technology correctly.

We hope this article is helpful for you and you can use your device easily. We want you to share your experience about each of the parts you use and also the experience of using the device if you have one.